MANUFACTURING ENGINEER

1. Manufacturing Engineer
• Degree Holder or Diploma in Electrical / Mechanical Engineering
• Must have least 5 years working experience in Electronics Manufacturing Environtment on the same position
• Must have knowledge of product Analisys, & Industrial Engineering
• Able to supervise & motivate a group of technicians

2. Program Administrator / planner
• Degree Holder or Diploma
• Must have least 3 years working experience for Production & Material Planning
• Preferably to have MRP experience

3. PURCHASING OFFICER
• Degree Holder or Diploma
• Must have at least 3 years Purchasing experience in manufacturing environtment with worlwide contacts
• Good communication and negotiation skill are required

General Requirements:
Able to speak & write in English, computer literate, hardworking, self motivated & also able to work in team
Please send your CV, Copy of Certificates & Photograph to:
Human Resource Department
PT ESG PANATEC
Jl. Beringin Lot 338
Batamindo Industrial Park
Muka Kuning - Batam 29433
or e-mail : hr@esg-panatec.com
www.esg-group.com.sg

Nb. * The vacancy is opened on November 29, 2008 and will be closed on December 6, 2008

MATERIAL PLANNER

1. ASST. PRODUCTION CONTROL MANAGER (ASST. PC)
• Min 30 years of age.
• Min Degree in any disciple.
• Experience in production planning, material planning, customer service and inventory control.
• Having knowledge in ERP is preference.

2. MATERIAL PLANNER (PLANNER)
• Male or female, 25 – 30 years of age.
• Single, min Diploma or Degree in any discipline.
• Having experience in material planning and customer service.
• Fluent in English and able to operate computer.

Human Resources Department
PT. SANWA ENGINEERING BATAM
Blok 215 A/B Jl. Beringin BIP Muka Kuning Batam 29433
Or send email to : hr.recruit@sanwaengineering.com
Please put the code on the left corner of the envelope.

Nb. * The vacancy is opened on November 29, 2008 and will be closed on December 6, 2008

PROJECT ENGINEER

• Project Engineer ( PE )
- University Degree in Naval Architech
- Experience 3 Years in same position
- Mastering AutoCAD 2007, MS Project 2007, MS Word, MS Excel, MS Power Point
- Able to work in under pressure situation
- Hard working and discipline is an advantage

• QC Engineer ( Qce )
- Diploma in Naval Architech
- Experience 1 Years in same position
- Mastering AutoCAD 2007, MS Project 2007, MS Word, MS Excel and MS Power Point
- Able to work in under pressure situation
- Hard working and discipline is an advantage

• Welder ( WD )
- Qualified in 3G, 4G and 6G
- Able to work in under pressure situation
- Hard working and discipline is an advantage

Should you need the above qualification,send your application with complete CV, certificate, transcript and recent photograph to :
PT Steel Tech Asia
Rafflesia Bussiness Centre Block E no 2
Batam Centre – Batam or mail your CV to : bruce@steeltechasia.com

Nb. * The vacancy is opened on November 29, 2008 and will be closed on December 6, 2008

EVENT COORDINATOR

1. ACCOUNTING MANAGER Male/Female
2. SALES & MARKETING EXECUTIVE Female
3. EVENT COORDINATOR Male/ Female
4. SPORT & RECREATION SUPERVISOR Male
5. F & B CAPTAIN Male
6. COOK Male
7. RECEPTIONIST Male/Female
8. WAITER/WAITRESS Male /Female

General Requirements is following :
1. Min 2 years experience in same field (position1,2,3,4),1 year (position 5,6,7,8,9)
2. Tourism & Hospitality background is preferred.
3. Min Diploma (position 1,2,3,4 ), senior high school (position 5,6,7,8)
4. Being proficient in oral and written English with good communication skills.
5. Mandarin speaking will be an advantage
6. Being computer literate is a must (1,2,3,4)
7. Able to work independently & with strong leadership.
8. Good salary & benefit

Please send your application letters with detail CV by email to hrd_srb@yahoo.com
Please submit your application within a week after this advertisement.

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

ASSISTANT SUPERINTENDENT

1. MOLDING TECHNICIAN (MOLD – TECH)
• Male, max 30 years of age
• Min Technical High School
• Having experience min 2 years in injection molding
• Able to handle trouble shooting

2. CLERK (TL – CLERK)
• Female, max 28 years of age
• Min Diploma Degree in any discipline
• Having experience min 1 year in same position
• Able to operate Microsoft Excel and Word

3 ASST. PRODUCTION CONTROL MANAGER (ASST. PC)
• Min 30 years of age.
• Min Degree in any disciple.
• Experience in production planning, material planning, and customer service and inventory control.
• Having knowledge in ERP is preference.

4 ASST SUPERINTENDENT (ASST SUPT)
• Male, Max 35 years of age
• Min Diploma Degree in any discipline
• Having experience min 2 year in same position
• Familiar with Plastic Injection Moulding.
• Fluent in English both written and oral.

Human Resources Department
PT. SANWA ENGINEERING BATAM
Blok 215 A/B Jl. Beringin
BIP Muka Kuning Batam 29433
Or send email to :
hr.recruit@sanwaengineering.com
Please put the code on the left corner of the envelope.

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

PURCHASING OFICER

A Contractor Manufacturer located in Batam, Indonesia is seeking a qualified and dynamic individual to join us as :

1. Purchasing Officer
• Female, max. 30 years old
• Min. Diploma Degree in any discipline
• Having experience min. 1 year in the same field
• Must can be speak Mandarin
• Fluent in English both oral and written

2. Technician - Spray & Tampo Print
• Male, max. 30 years old
• Min. Senior High School / STM
• Experience on the same file at least 2 years
• Strong interpersonal skill and able to work under pressure

Interested applicants are invited to write in to us with full detailed resume starting current and expected salaries together with a pssport sized photograph to :

Human Resource Department
PT. Tectron Manufacturing
Hijrah Industrial Park Blok E No.4 Batam Centre
Email : entien@tectronmfg.com

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

PURCHASING MANAGER

A Leading Resort in Batam urgently Requires :

Purchasing Manager


Requirements :
1. Minimum 2 years experience in similar position (hotel background will be an advantage)
2. Experience in vendor development and supplier audit
3. Good negotiation and analytical skills
4. Organized, detailed oriented and able to make productive and eficient decisions
5. Proficient in English and computer literate
6. Has strong leadership, pleasant personality, and good communication skill
7. Perform well under tight deadline

Please send your application letter and resume to the following e-mail :
1. recruitment@batamview.com or
2. viva@batamview.com
Latest by 30 November 2008

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

PURCHASING OFICER

Jobs & Responsibilities

• Sourcing and purchasing of materials/equipment related to production and facilities.
• Purchasing for technical items such as jig & tooling fabrication timely to support production needs.
• Achieve cost reduction target through negotiation with vendors, or qualification of alternate materials/equipment
• Build strong rapport with suppliers and internal customers.
• Must be able to work independently.

Requirement
• Degree in Engineering with minimum 3 years experiences in Purchasing.
• Good knowledge in Purchasing and negotiation skill
• Good knowledge of material properties that comply with environmental needs
• Experiences in handling local and oversea suppliers/vendor.
• Able to read technical drawings
• Familiar with SAP

General Requirements for all the above positions:
• Possess good interpersonal skills.
• Speak and write English fluently.
• Be computer literate in the area of operational requirements.
• Self-motivated and ability to work independently.

Please send your resume, photograph, expected salary and contact number to :

The Human Resource Department
PT. PerkinElmer Batam
JL. Beringin Lot 207, 2nd Floor, Batam 29433
or e-mail to: hr.btm@perkinelmer.com (email should not exceed than 100kb)
(Applicants who do not meet requirements are not encouraged to apply)

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

ASSISTANT MATERIAL PLANNER AND BUYER

JOHNSON OUTDOORS is a global enterprise with over 36 years history and more than 1.300 employees operating across 23 locations. They design, manufacture, and market many of the world’s best-known outdoor recreational products. The Company’s award-winning innovation is fueled by a unique passion for the outdoors, coupled with sophisticated market research and cutting edge technology to advance a continous pipeline of new products across four categories: Marine Electronics, Watercraft, Outdoor Equipment and Diving.

The diving leading brands SCUBAPRO and UWATEC command market-leadership positions in the state of the art and innovative diving products. The manufacturing operations in Batam Indonesia, PT. Uwatec Batam is now looking for a:

Assistant Material Planner and Buyer

Responsibilities:
Assisting Senior Planner & Buyer in:
1. Daily Material Requirements and procurements activities
2. New product introduction and critical path planning
3. Price maintainance and reconcilling invoice discrepancies
4. Maintenance and ensure accuracy of the bill of material
5. Fosters Supplier relationship
6. Work with the quality team for disposition of rejected material
7. Perform Supplier audits and ensure supplier performance (Service, Cost and Quality)
8. Develop and deliver cost savings
9. Manage Product Life Cycle - new material and end of life material for minimal obsolescence
10. Support global sourcing initiatives and vendor transitioning
11. Support of Sales and Operations planning process

Requirements
1. Diploma III preferred with experience and knowledge of MRP II
2. 3 years hands on experience in material planning & purchasing with negotiation skills
3. Temwork and good interpersonal skills
4. Able to work independently
5. Proficient in Ms. Office & ERP systems
6. Fluency in English

Send your complete application letter, expected salary & one recent photograph within one week after this advertisement to address below:
PT. UWATEC Batam
Jl. Kenanga Lot 258
Batamindo Industrial Park
Muka Kuning - 29433
Batam Island
Or via e-mail : letrant.silalahi@uwatec.co.id
Only short listed candidates will be called for interview

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

DESIGNER, ELECTRICAL AND ELECTRONIC

BATAM PRECISION

We are require following position

1. SALES AND MARKETING ENGINEER
2. DESIGNER: Mould, Jig and Fixture
3. DESIGNER: Industrial Automation
4. ELECTRICAL AND ELECTRONIC
5. ENGINEERING: PLC and Microchip
6. Programming

Qualification:
1. S1 preference or D3 in Mechanical or Industrial Engineering (1,2&3)
2. S1 preference or D3 in Electrical or Electronic Engineering (4)
3. Min. 2 years working experience in related position
4. Must be able to operate AutoCad and Master Cam (2&3)
5. admin
6. qc inspector
7. ac technician
8. miller

Qualification:
1. Female (5,6)
2. S1 Preference or D3, SMA/SMK in Accounting (5)
3. Min. 2 years working experience in related position (5,6,7&8)
4. Chinese, capable of speaking and writing good English/Mandarin/Hokkian (5)
5. Min. SMA/SMK/STM (2,3,4)
6. Good initiative, dynamic, hardworking, friendly and can work independently

Send in your CV to:
PT. Batam Precision
Tunas Industrial Estate Block 2-D
Batam Centre-Batam
Or e-mail to:
2929f@batamprecision.co.id

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

ACCOUNTING & ADM OFFICER

Well established Oil and Gas Construction Engineering Company located in Batam Indonesia and have the following career opportunities for dedicated and experienced individuals to be part of our team as

Accounting & ADM Officer

a) Min Diploma 1 Account, able to operated MYOB & Min 3 years working experiences
b) Good personality skill, self motivated, presentable highly organized, able to work independently
c) Hardworking and willing to learn
d) Able to speak and write English as well as Mandarin
e) Able to start work on 15/12/2008

Confident applicants to apply with full CV and recent photo, contact number & expecting salary to email address hr@tojbatam.com

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

QC ENGINEER, SCHEDULLER

Cladtek is one of well established Fabrication company with a portfolio that includes Cladding and Weld Overlay techniques for vessels, dished heads, Bi-metal lined pipe and all associated components, Looking for a potential candidates to join our team as

QC ENGINEER
Description of Function :
- Mechanical / Metallurgical Engineering background
- Min 3 years experience as QC Engineer in oil & gas field
- Good understanding in manufacturing process, especially in metal forming, welding and testing
- Good understanding with Codes and Standards (ASME, API and ISO)
- Proficient in English
- Held a Welding Engineer certificate is preferred
- Experience in manufacturing business is more advantage

SCHEDULLER / PLANNER OFFICER
Description of Function :
- Requires a bachelor's degree and 2 years of experience in the field or in a related area
- Experience of working with remote teams and the ability to priorities workloads
- Have good knowledge and experience on project planning, skills combined with the capability
- Good understanding in Project management tools (Ms Project)
- Proficient in English

Should you meet the requirements above and willing to pursue your future career, please send your comprehensive resume, recent photograph & expected salary to:

Human Resources Department
PT. CLADTEK BI METAL MANUFACTURING
Jl. Tengiri, Batu Ampar, Batam, Indonesia
or Email : recruitment@cladtekbimetal.comE-mail ini dilindungi dari spam bots, kamu perlu mengaktifkan JavaScript utk melihatnya or hrdbatam@gmail.com

Only shortlisted candidates will be notified

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

DEPARTMENT HEADS

PT. Marcopolo Shipyard, Batu Aji
We are a fast growing Ship Building and Shiprepairing Shipyard located in Batu Aji.
For our future growth and expansion plans, we would like to invite suitable candidates to apply for the following posts :

1. Department Head & Supervisors - Hull (Steel Work)
2. Department Head & Supervisors - QA/QC (Repairs)
3. Department Head & Supervisors - Electrical
4. Department Head & Supervisors - Shipwright (Docking operations, painting & Staging)
5. Department Head & Supervisors - Facilities

A. Requirements for post 1 to 5

For Department Heads
(Manage the department, plan, organize resources, motivate staff to execute projects in a timely and professional manner according to Marine rules, regulations and practices)
1.1. At least 2 years working experience in a reputable Shiprepair/shipbuilding yard as a Department Head
1.2. Diploma / Degree in Shipbuilding or Marine or offshore Engineering
1.3. Good in written and spoken English

For Supervisors
(Supervise chargehands and workers, plan, organize resources to carry out work in site)
1.1. At least 2 years working experience in a reputable Shiprepair/shipbuilding yard as a Department Head
1.2. Good in written and spoken English

Please send your resume via e-mail to :
ks.chan@marcopolomarine.com.sg

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

PROJECT SUPERINTEDENTS

PT. Marcopolo Shipyard, Batu Aji
We are a fast growing Ship Building and Shiprepairing Shipyard located in Batu Aji.
For our future growth and expansion plans, we would like to invite suitable candidates to apply for the following posts :
6. Project Superintedents
7. Commercial Officers

Requirements for post 6
(Plan. liaise with Clients, trade supervisors, sub-contractors, prepare Work Schedule and Cost Control)
1.1. At least one year working experience in a reputable Shiprepair/shipbuilding yard as a Project Superintendent in Shiprepair or Shipbuilding department
1.2. Diploma / Degree in Shipbuilding or Marine or offshore Engineering
1.3. Good in written and spoken English

Requirements for post 7
(Estimate, bill, sub-contract, budget and cost control for Shiprepair/Shipbuilding)
1.1. At least one year working experience in a reputable Shiprepair/shipbuilding yard as a Commercial Officer
1.2. Diploma / Degree in Shipbuilding or Marine or Offshore Engineering
1.3. Good in written and spoken English

Please send your resume via e-mail to :
ks.chan@marcopolomarine.com.sg

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

MECHANICAL SUPERVISOR, INSTRUCTOR

A. Help Desk Assistant
Requirements:
• Female, max 30 years old
• Min Diploma (any discipline)
• Fresh are welcome ; have experience in the same position would be advantaged
• Fluent in English
• Computer Literate
• Willing to work Overtime

B. Carpenter Supervisor
Requirements:
• Minimum Senior High School (SMU).
• Possess min. 3 years of related working experience in shipyard.
• Understand about ship interior systems.

C. Mechanical Supervisor
Requirements:
• Minimum Diploma III (Mechanical Engineering)/Naval Engineering.
• Possess min. 3 years of related working experience in shipyard.

D. QC Inspector
Requirements:
• Min. Diploma from Naval Engineering.
• Possess Min. 2 years of working experience at the same position in shipyard.
• Have Welding Inspector Certificate

E. Instructor (Pipe, Plate & Welding)
Requirements:
• Minimum Diploma 3 in Mechanical or Technical Engineering.
• Possess minimal 3 years of working experience at the same position or min. 5 years of the Foreman working experience.
• Preferable who have experience as Pipe Foreman (Pipe Instructor), Structure Foreman (Plate Instructor).
• Good knowledge of welding processes (SMAW, SAW, GTAW, FCAW-SS, FCAW-GS & GMAW).
• Able to prepare Training Schedule, Trainee Assessment, Module Development and other Training & Development jobs.

F. Project Ship Repair Manager
Requirements:
• Marine Engineer Class 4 background or
• Naval Architect / Marine Workshop Repairman
• Possess min. 3 years of working experience at the same position
• Familiar with Shipboard & Shipyard Company
• Good communication in English both oral and written and able to operate computer.

G. Planning Engineer
Requirements:
• Minimum diploma 3 in any discipline, Marine/Naval background is preferable.
• Possess min. 3 years of working experience at the same position.
• Good computer knowledge in both Excel and Primavera
• Shipping industry knowledge background.
• Basic Presentation & report writing Skills

H. Commercial Officer
Requirements:
• Male/female, max. 35 years old.
• Diploma or degree in Naval.
• Min. 1 year of working experience at the same position in a shipyard company.

I. Hull Supervisor
Requirements:
• Minimum diploma 3 in Naval.
• Possess minimal 3 years of working experience at the same position.
• Good experience in Shipbuilding & Ship repair.

J. Production Control Assistant
Requirements:
• Minimum diploma 3 in any discipline, Marine/Naval background
• Possess min. 3 years of working experience at the same position and same field.

K. Canteen Cashier
Requirements:
• Female
• Minimum Senior High School
• Possess min. 1 year of working experience at the same position, preferred from hospitality background.
• Fluent in English

L. Automation Engineer
M. Electrician & Elect. Rewinding
N. Technician
O. Charge hand Electrician
P. Electrical Fitter
Q. Electrical Supervisor

Requirements:
• Minimum Diploma with 5 years experiences in ACB Testing, Calibration and others control automation (L), 2 or 3 years experiences in the same position and same field , in shipyard and marine field will be advantage (M - Q).
• Have knowledge and skill in ship repair or automation and generator & motor rewinding work (M - N), understand fitting and cutting basic preferable in electrical jobs (P)
• Able to work independently, organized and lead the team (O & Q)
• Must be able to communicate in English (O & Q)

R. Foreman Hull Welder
Persyaratan:
• Minimal tamatan SMU/SMK.
• Pengalaman kerja min. 3 tahun pada posisi yang sama.
• Dapat bekerja dibawah tekanan, dalam team maupun independent.

Interested applicants are invited to send the application, expected salary and other supporting documents not later than 10 days after this advertisement to:

Human Resources Department
PT. Drydocks World - Pertama
Jl. Brigjend Katamso, Tanjung Uncang - Batam Island
E-mail: recruitment@panunited.co.id

For application through e-mail, we only accept in word, excel and PDF file format not more than 300 KB

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

PAYROLL OFFICER

HUMAN RESOURCE DEPT. PT. JMS BATAM
JL. BERINGIN LOT 211, KAWASAN INDUSTRI BATAMINDO, BATAM – 29433 email: bhrd@jmsb.co.id

We are one of The Leading Manufacturer of Disposables Medical Devices. JMS Group Operated in 3 continents with worldwide market ESTABLISHED 1965, is looking for below candidate :

q Production Supervisor ( Code : PS )
• Male / Female, Max 30 years old.
• Degree in Engineering or Natural science
• Experience in Production Supervisor & Logistic Control is preferable
• Understanding in Plastic Manufacturing is an advantage.

Responsible for :
• Execute and co-ordinate daily / weekly / monthly production.
• Control daily output and target of machine and the operation of designation machine.
• Plan and co-ordinate daily allocation of manpower to achieve production target.
• Set & implement Standard Operating Procedure, Manufacturing Instruction in line with Good Manufacturing Practice to facilitate supervision for product quality and process control.

q Technical Supervisor ( Code : TS )
• Degree in Electrical & Mechanical Engineering.
• Understanding in PLC, AUTOCAD is an advantage.

Responsible for :
• Responsible for the operation of designation machine.
• Responsible for installation, maintenance, calibration and validation of machines, equipment and related process to supported production function.
• Plan, evaluate, cost project, and productivity status of machine to achieve optimal design, cost saving, production yield and safety.

q Extrusion Supervisor ( Code : ES )
• Male, Max 30 years old.
• Degree in Mechanical or Electrical Engineering.
• Understanding in Plastic Manufacturing is an advantage.
• Experience in injection moulding is preferable

Responsible for :
• Execute and co-ordinate daily / weekly / monthly production.
• Plan and co-ordinate daily allocation of manpower to achieve production target.
• Set & implement Standard Operating Procedure, Manufacturing Instruction in line with Good Manufacturing Practice to facilitate supervision for product quality and process control.

q Payroll Officer ( Code : PO )
• Male, Max 30 years old.
• Degree in Economy is preferable
• Familiar with Microsoft office.

Responsible for :
• Maintain and update daily / weekly / monthly attendance record
• Perform Payroll administration process

GENERAL REQUIREMENTS :
• Able to communicate in English (both oral and written).
• Computer literate.
• Able to work under pressure with Leadership and Analyzing ability.

Please send the application letter with the position code to the address mentioned above latest one week after this advertisement

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

COSTING ASSISSTANT SUPERVISOR

We are Japanese company, currently is looking for high qualified & motivated person to fill the position of:
Costing Assistant Supervisor

Qualification:
• Male/Female
• Minimum D3
• Good knowledge in Cost Accounting and Manufacturing Process
• Having Experience in the same field is an advantage
• Good communication skill in English both oral & written, able to operate
MS Office.
• Understand ISO 9001, ISO 2000 & ISO 14000.

Able to work hard, under-pressure, independence & in teamwork as well, self-starter, posses good performance & interpersonal.

Please state your expectation salary, applicants without stated the expectation salary will not be process.
Please send your completed job application letter with contact telephone number to:

PT. SONY CHEMICALS INDONESIA
Jl. Beringin Lot. 333
BIP Muka Kuning
Batam 29433
Or send your CV and application only by Email to
HR-SCI@Sonychem.com.sg

Within 1 week, only short listed candidate will be notified. All applicants will be treated equally treatment.

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

SENIOR ACCOUNTANT

We are a well established service and manufacturing company in Batam Centre. Currently we are looking for a few potential candidates to join our team :

1. Marketing Manager
2. Senior Accountant
3. Mechanic

Requirements :
- (1-2) Minimum 5 years experience in similar position
- (1) Strong command of professional english in both verbal and written to liaise with customers
- (1) Good planning and managerial skills
- (2) Incharge of full set finance & Accounting reports (AP, AR, Petty Cash, Bank Listing, Journal voucher, Balance sheet, general ledger and income statement)
- (1-2) Able to speak mandarin will be an advantage
- (3) Minimum 2 years relevant experience in mechanic
- (3) Good Knowledge to Overhaul Diesel Engine & Low Speed Engine (Genset Engine)

Should you meet the requirements above and willing to pursue your future career, Please send your comprehensive resume, recent photograph & expected salary to:

PT. PETRUS INDONESIA
Citra Buana III Centre Park, Lot 16,

Jl. Engku Putri, Batam Centre or Email : recruitment@petrusindonesia.com
Only shortlisted candidates will be notified

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

FRONT OFFICE MANAGER

Required Immediately at Swiss Belhotel Batam

1. Front Office Manager
2. Food & Beverage Manager
3. Publik Relations Officer
4. Bell Boy
5. Cook

Requirements
• Male max. 35 years old (1,2); Female max. 25 years old (3) Male max. 25 years old (4);
• Male max. 30 years old (5)
• At least two years experience as Assistant FOM or FOM (1)
• At least two years experience in 3 or 4 star hotel, Strong Training background, Good overall Knowledge of food & beverage industri (2)
• At least two years experience public relations field or comparable position (3)
• Good communication both oral and written in English (1,2,3)
• Able to work in a team & working under pressure
• Good computer skills (1,2,3)

Please send your application letter and CV with photograph not later than 1 (one) week after this advertisement to:

Human Resource Department
PO.BOX 1023 Nagoya - Batam
Email: hrmsbtm@swiss-belhotel.com

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

IT ENGINEER

We are a Multi national Company seeking for highly qualified & talented candidates to fill our vacant positions :

1). IT ENGINEER
2). STORE CLERK
3). SECURITY GUARD

Requirements :
1. Min. D3 Majoring in Informatics Science/ Computer Engineering (1)
2. Min. High School in any discipline (2 & 3)
3. Have knowledge about Computer hardware/software (1)
4. Good interpersonal and communication (1,2 & 3)
5. Team & hard worker (1,2 & 3)
6. Responsible for Security job scope (3)
7. Honest & motivated, good attitude (1,2 & 3)
8. Able to speak and write reasonable good English (1 & 2)
9. Familiar with Microsoft Office (1 & 2)

Please send in a detailed to :

PT. SYS-MAC INDONESIA
Puri Industrial Park 2000, Blok B No.8-9
Batam Centre
e-mail : ptsmhr@sysmac.com.sg

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

EDP CLERK

We are a foreign Plastics Injection Molding Company looking for a qualified candidates to fill the following positions (only shortlisted candidates will be notified) :

1. EDP Clerk
Requirements / Qualifications :
• Minimum Diploma, Single, Female / Male
• Minimum of 2 years in experience in same position
• Good communication skill in English oral & written
• Able to operate computer of Microsoft Office

2. Sprayer
Requirement / Qualifications :
• Minimum SMU/STM, Male
• Understand about spray painting process & was experience in spray painting process
• All above position is able to work hard, under pressure, independence and team work, as well as self starter, posses good performance, interpersonal and progressive working attitude

If you match with the requirement/qualification, please send your complete Application letter including your resume (CV), in English with your telephone/HP number, recent photograph, or email not more than on 27th November 2008 to :

Human Resources Department
PT. Eurollence Plastics Indonesia
Lot 02-03, Jln. Ahmad Yani, Muka Kuning Batam, Indonesia
E-mail address : eurollence.btm@gmail.com

Nb. * The vacancy is opened on September 22, 2008 and will be closed on September 29, 2008

ACCOUNT PAYABLE

We are a foreign company for shipyard engineering field. We are looking for candidates who have relevant skills and experiences in administration field for the following position :

1. Account Payable
2. Admin Clerk

Requirements :
• Associate Degree major of economic or any field relevant
• Min. 2 years experience in admin is a must
• Able to prepare tax, invoice & filling
• Familiar with standard codes for engineering
• Fluent in English both oral and written
• Good intra personal, interpersonal and communication skill
Please send application with comprehensive CV and other document related by email within 1 weeks to :

PO. BOX. 110 BATAMIS SEKUPANG
Or email to : PT.HumanRes@gmail.com

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

OFFICE ADMINISTRATOR

we are foreign company operating in Tanjung Uncang looking for suitable candidate to fill the position of:

SECRETARY / OFFICE ADMINISTRATOR

Qualification:• Female, min 25 years old
• At least Diploma in Secretary or Office Administration
• Minimum 2 years experience in the same position
• English literate (spoken & written)
• Good interpersonal skill and able to work in team
• Reliable, honest and can perform under pressure

Please submit your Application letter & resume to:

PT. World Wide Equipment SEA
Email: info@worldwidebatam.com

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

FINANCIAL ANALYST

We are Multinational company manufacturing of mechanical and electrical precision parts located in Bintang Industrial Park 2, Tanjung Uncang, Batam Island would like to invite suitable candidates to fill in below positions :

Cost & Financial Analyst

Requirements :

1. S1 in Accounting, Female
2. Min. 3 years in Manufacturing Company
3. Have good knowledge Manufacturing cost and controls
4. Familiar with Personal Computer, Fluent in English spoken and written
5. Able to work independently and able to speak Mandarin language

Send your application letter, resume, copy of certificate, copy transcript, copy of KTP, photo and others supporting certificates to :

Human Resources Manager
PT. TEAM METAL INDONESIA
Jl. Brigjend Katamso No. 7 - 8
Kawasan Industri II, Tanjung Uncang - Batam
Email : hrd@teammetal.

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

SITE ASSISTANT

We are foreign Company from South Korea looking for candidates to fill position of
SITE ASSISTANT

Requirements:
1. Male/Female with fluent English both oral and written.
Korean speaking be additional
2. Fresh graduate from Engineer Architecture/Mechanical/Electrical or have some experience with same position better

Please send application letter, CV, expected salary and other document related by email not later than 1 (one) week after this advertisement to:
bff486@naver.com or say486@hotmail.com
Contact person:
Catur Ananto Hp. 081270444847

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

ENGINEER

A Multinational supplier company dealing with electronics in Batam Island and Region looking for :

1 Sales Executive / Engineer
• Male / Female
• Diploma / Degree holder or Professional Qualification
• Preferably with relevant working experience in sales
• Highly initiative and effective in teamwork as well as able to work independently with minimal supervision
• Preferably able to speak English
• Posses Driving license
• Attractive salary + commission

2. Sales Coordinator
• Male / Female
• SMU / Diploma Holder
• Preferably with relevant working experience in sales
• Highly initiative and effective in teamwork as well as able to work independently with minimal supervision
• Preferably able to speak English / Mandarin
• Knowledge in computer (MS Office) is an advantage

Please email your comprehensive resume and photograph to :

Sales Manager - Mr. Balan
Email : balan.sg@techcogroup.biz
PT. Techco Indo
Komp. Batam Executive Centre
B4 No 9 Sei Panas, Batam
Tel : 0778 - 429502, 429504
Fax : 0778 - 431875

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

HUMAN RESOURCE STAFF

We are multinational company in Electronic Assembly Manufacturing seeking the following position to join our team.

• MAINTENANCE STAFF (MTC)
• PRODUCTION STAFF (PROD)
• QA STAFF (QA)
• HUMAN RESOURCE STAFF (HR)

Qualifications :
a. Male or Female maximum 27 years old (MTC, PROD)
b. Female, maximum 27 years old (QA, HR)
c. D3 or S1 from Mechanical / Electronic / Electrical (MTC and QA)
d. D3 or S1 from Industrial Engineering (PROD)
e. D3 or S1 from Economic / Law (HR)
f. Able to apply AutoCAD, CorelDraw, and Power Point (PROD)
g. Familiar in payroll process and understand PPh 21 & 25 calculation (HR)
h. Understand manpower law and regulation (HR)
i. Must have experiences in similar position minimum one year
j. Proficient to operate Microsoft Office
k. Fluent in English both oral and written
l. Can speak Japanese would be advantage

Interest & qualified candidates please submit your application, comprehensive resume along with relevant documents and recent photograph, 10 days after this advertisement to :

GA/HR Manager
PT. EPSON BATAM
Jln. Rambutan Lot 504-508A
Batamindo Industrial Park, Mukakuning, Batam
Phone : (0770) 611151, Fax : (0770) 611115
Email : peb-recruitment@sep.epson.com.sg

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

MANUFACTURING ENGINEER

A leading Hard Disk Drive Rubber and Plastic Company located in Batam Island is looking for dynamic and skilled professional to strengthen our fast growing team to fill the position below

1. Manufacturing Engineer (ME)
2. Process Engineer (PE)
3. Quality Control (QC)

Requirements:
1. Male/Female with holding Diploma/Degree from Mechanical Engineering (ME,PE), & Technical or Science Degree (QC)
2. Fresh graduates are welcome to apply but relevant experience will be an advantage (ME, PE, QC)
3. Can speak English & operate windows application (ME, PE, QC)
4. Understanding technical drawing is a must (ME, PE)
5. Able to design simple jig & fixture, MTM & tooling machine (ME, PE)
6. Able to use AutoCad Program (ME, PE)
7. Self motivated person & good problem solving analysis (ME, PE, QC)
8. Understand SPC, FMEA, Six Sigma, IPQC & cleanliness requirements for HDD (QC)
9. Can operate measurement tools such as TMM, Nexiv is an additional advantage (QC)

Please send your complete application, expected salary & other supporting documents within 10 days after this advertisement to:

HUMAN RESOURCE DEPARTMENT
PT. NOK PRECISION COMPONENT BATAM
Jl. Gaharu Lot 101-102 BIP Mukakuning

Or via e-mail : gibsonrichardo@nok.com.sg
Only shortlisted candidates will be notified

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

PPC ADMINISTRATION

PT. Dwi Sumber Arca Waja (DSAW), located in Batam with the internasional standard licenses for manufacturing of Large diameter Steel Pipes and Structural Tubular to support Oil and Gas industries is looking for an additional experienced employees for the position:

1. MAINTENANCE ENGINEER
2. PROD. ENGINEERING SUPT
3. PPC ADMINISTRATION
4. QA. DOCUMENT OFFICER

Requirements ;
• University Dagree (S1) Techinical/ Engineering (1,2,3)
• Minimum Senior High School (4)
• Experience in developing of production cost estimation and Producton
Planning & Control (3)
• Experience in Design &
Product Engineering (2)
• Experience in industrial Maintenance (1)
• Experience in QA documentation 2 years & ISO 9001 documentation
is advantage (4)

Interested candidates should be apply with full details CV, recent photograph and contact telephone number not later than 7 days after this advertisement to :

The HRD P.O. BOX 155
Batam Centre
Fax: 0778-711242
Email: btmrecruitment@gmail.com

Note:
* All documents are not returnable
* The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

FRONT OFFICE MANAGER

Required Immediately at Swiss Belhotel Batam

1. Front Office Manager
2. Food & Beverage Manager
3. Publik Relations Officer
4. Bell Boy
5. Cook

Requirements
• Male max. 35 years old (1,2); Female max. 25 years old (3) Male max. 25 years old (4);
Male max. 30 years old (5)
• At least two years experience as Assistant FOM or FOM (1)
• At least two years experience in 3 or 4 star hotel, Strong Training background, Good overall knowledge of food & beverage industri (2)
• At least two years experience public
relations field or comparable position (3)
• Good communication both oral and written in English (1,2,3)
• Able to work in a team & working under
pressure
• Good computer skills (1,2,3)

Please send your application letter and CV with photograph not later than 1 (one) week after this advertisement to:

Human Resource Department
PO.BOX 1023 Nagoya - Batam
Email: hrmsbtm@swiss-belhotel.com

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

AUTO INSERT TECHNICIAN

We are US Multi-National Company, in term of our tremendous growing projects for our new Batam plant (Cammo Industrial Park Batam Centre); we seek qualified candidates for some positions below:

1. Process Engineer
2. Auto Insert Technician

Qualification

no 1 - 2 :
- Min Diploma in Electronics/Electrical Engineering or High School with 1-2 years experience in same position
- Fresh graduates in electronics are also welcome
3. Store Supervisor
4. Asst. Planner
5. Receptionist (Female)

Qualification 3-4:

- Male / Female, max. 30 years old, min D-3 Electronics/Electrical Engineering.
- Min Senior High School, max. 23 years old (5)
- Experience min 1-2 years in same position Electronics/PCBA Company.
General Qualification:
1. Excellence in English both oral and written and Computer skills is a must.
2. Able work independently and self motivate.
3. Can work independently as well as in a team with Minimum Supervision
4. Good Looking & Pleasant Personality

* Note: We prefer candidates send application and supporting documents to our PO BOX
With Compete Application, position applied, CV, Recent photo and Phone No within a week to:

HR and Admin Department
PO BOX 889 Batam Center - Batam
Or e-mail to:
hrdbbg@yahoo.com

* Only short-listed candidates will be notified

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

ASSOCIATE ENGINEER

1. ASSOCIATE ENGINEER
• Degree Holder or Diploma in Electrical / Mechanical Engineering
• Must have least 5 years working experience in Electronics Manufacturing Environment on the same position
• Must have knowledge of Product Analyst, & Industrial Engineering
• Able to supervise & motivate a group of Technicians

2. PROGRAM ADMINISTRATOR / PLANNER

• Degree Holder or Diploma
• Must have least 3 years working experience for Production Material Planning
• Preferably to have MRP experience

General Requirements :

Able to speak & write in English, computer literate, hardworking, self motivated & also able to work in team
Please send your CV, Copy of Certificates & Photograph to :

Human Resource Department
PT. ESG PANATEC
Jl. Beringin Lot 338
Batamindo Industrial Park
Muka Kuning - Batam 29433
or email : hr@esg-panatec.com, www.esg-group.com.sg

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

EVENT COORDINATOR

1. ACCOUNTING MANAGER Male/Female
2. SALES & MARKETING EXECUTIVE Female
3. EVENT COORDINATOR Male/ Female
4. SPORT & RECREATION SUPERVISOR Male
5. F & B CAPTAIN Male
6. COOK Male
7. RECEPTIONIST Male/Female
8. WAITER/WAITRESS Male /Female

General Requirements is following :

1. Min 2 years experience in same field (position1,2,3,4),1 year (position 5,6,7,8,9)
2. Tourism & Hospitality background is preferred.
3. Min Diploma (position 1,2,3,4 ), senior high school (position 5,6,7,8)
4. Being proficient in oral and written English with good communication skills.
5. Mandarin speaking will be an advantage
6. Being computer literate is a must (1,2,3,4)
7. Able to work independently & with strong leadership.
8. Good salary & benefit

Please send your application letters with detail CV by email to hrd_srb@yahoo.com
Please submit your application within a week after this advertisement.

Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

ASST SUPERINTENDENT

ASST SUPERINTENDENT

Saturday, November 15, 2008 to November 29, 2008

1. MOLDING TECHNICIAN (MOLD – TECH)

• Male, max 30 years of age
• Min Technical High School
• Having experience min 2 years in injection molding
• Able to handle trouble shooting

2. CLERK (TL – CLERK)

• Female, max 28 years of age
• Min Diploma Degree in any discipline
• Having experience min 1 year in same position
• Able to operate Microsoft Excel and Word

3 ASST. PRODUCTION CONTROL MANAGER (ASST. PC)

• Min 30 years of age.
• Min Degree in any disciple.
• Experience in production planning, material planning, and customer service and inventory control.
• Having knowledge in ERP is preference.

4 ASST SUPERINTENDENT (ASST SUPT)

• Male, Max 35 years of age
• Min Diploma Degree in any discipline
• Having experience min 2 year in same position
• Familiar with Plastic Injection Moulding.
• Fluent in English both written and oral.

Human Resources Department
PT. SANWA ENGINEERING BATAM
Blok 215 A/B Jl. Beringin
BIP Muka Kuning Batam 29433
Or send email to :
hr.recruit@sanwaengineering.com

Please put the code on the left corner of the envelope

Nb. Nb. * The vacancy is opened on September 15, 2008 and will be closed on September 22, 2008

Purchasing Officer and Technician Spray & Tampo Print

Saturday, November 15 2008 to November 29 2008

A Contractor Manufacturer located in Batam, Indonesia is seeking a qualified and dynamic individual to join us as :

1. Purchasing Officer

• Female, max. 30 years old
• Min. Diploma Degree in any discipline
• Having experience min. 1 year in the same field
• Must can be speak Mandarin
• Fluent in English both oral and written

2. Technician - Spray & Tampo Print

• Male, max. 30 years old
• Min. Senior High School / STM
• Experience on the same file at least 2 years
• Strong interpersonal skill and able to work under pressure

Interested applicants are invited to write in to us with full detailed resume starting current and expected salaries together with a pssport sized photograph to :

Human Resource Department
PT. Tectron Manufacturing
Hijrah Industrial Park Blok E No.4 Batam Centre
Email : entien@tectronmfg.comE-mail ini dilindungi dari spam bots, kamu perlu mengaktifkan JavaScript utk melihatnya

Purchasing Manager

Saturday, November 15 2008 to November 29 2008

A Leading Resort in Batam urgently Requires :

Purchasing Manager

Requirements :
1. Minimum 2 years experience in similar position (hotel background will be an advantage)
2. Experience in vendor development and supplier audit
3. Good negotiation and analytical skills
4. Organized, detailed oriented and able to make productive and eficient decisions
5. Proficient in English and computer literate
6. Has strong leadership, pleasant personality, and good communication skill
7. Perform well under tight deadline

Please send your application letter and resume to the following e-mail :

1. recruitment@batamview.comE-mail ini dilindungi dari spam bots, kamu perlu mengaktifkan JavaScript utk melihatnya or
2. viva@batamview.comE-mail ini dilindungi dari spam bots, kamu perlu mengaktifkan JavaScript utk melihatnya
Latest by 30 November 2008

PURCHASING OFFICER

Saturday, November 15 2008 to November 29 2008

Jobs & Responsibilities

• Sourcing and purchasing of materials/equipment related to production and facilities.
• Purchasing for technical items such as jig & tooling fabrication timely to support production needs.
• Achieve cost reduction target through negotiation with vendors, or qualification of alternate materials/equipment
• Build strong rapport with suppliers and internal customers.
• Must be able to work independently.

Requirement
• Degree in Engineering with minimum 3 years experiences in Purchasing.
• Good knowledge in Purchasing and negotiation skill
• Good knowledge of material properties that comply with environmental needs
• Experiences in handling local and oversea suppliers/vendor.
• Able to read technical drawings
• Familiar with SAP

General Requirements for all the above positions:
• Possess good interpersonal skills.
• Speak and write English fluently.
• Be computer literate in the area of operational requirements.
• Self-motivated and ability to work independently.

Please send your resume, photograph, expected salary and contact number to :

The Human Resource Department
PT. PerkinElmer Batam
JL. Beringin Lot 207, 2nd Floor, Batam 29433
or e-mail to: hr.btm@perkinelmer.comE-mail ini dilindungi dari spam bots, kamu perlu mengaktifkan JavaScript utk melihatnya (email should not exceed than 100kb)
(Applicants who do not meet requirements are not encouraged to apply)

Assistant Material Planner and Buyer

Saturday, 15 November 2008 to Saturday 29 November 2008

JOHNSON OUTDOORS is a global enterprise with over 36 years history and more than 1.300 employees operating across 23 locations. They design, manufacture, and market many of the world’s best-known outdoor recreational products. The Company’s award-winning innovation is fueled by a unique passion for the outdoors, coupled with sophisticated market research and cutting edge technology to advance a continous pipeline of new products across four categories: Marine Electronics, Watercraft, Outdoor Equipment and Diving The diving leading brands SCUBAPRO and UWATEC command market-leadership positions in the state of the art and innovative diving products. The manufacturing operations in Batam Indonesia, PT. Uwatec Batam is now looking for a:

Assistant Material Planner and Buyer

Responsibilities:
Assisting Senior Planner & Buyer in:
1. Daily Material Requirements and procurements activities
2. New product introduction and critical path planning
3. Price maintainance and reconcilling invoice discrepancies
4. Maintenance and ensure accuracy of the bill of material
5. Fosters Supplier relationship
6. Work with the quality team for disposition of rejected material
7. Perform Supplier audits and ensure supplier performance (Service, Cost and Quality)
8. Develop and deliver cost savings
9. Manage Product Life Cycle - new material and end of life material for minimal obsolescence
10. Support global sourcing initiatives and vendor transitioning
11. Support of Sales and Operations planning process

Requirements
1. Diploma III preferred with experience and knowledge of MRP II
2. 3 years hands on experience in material planning & purchasing with negotiation skills
3. Temwork and good interpersonal skills
4. Able to work independently
5. Proficient in Ms. Office & ERP systems
6. Fluency in English

Send your complete application letter, expected salary & one recent photograph within one week after this advertisement to address below:

PT. UWATEC Batam
Jl. Kenanga Lot 258
Batamindo Industrial Park
Muka Kuning - 29433
Batam Island
Or via e-mail : letrant.silalahi@uwatec.co.idE-mail ini dilindungi dari spam bots, kamu perlu mengaktifkan JavaScript utk melihatnya
Only short listed candidates will be called for interview

Job Vacancies Period, November 08 2008, to November 29, 2008

A. PURCHASING SUPERVISOR

Saturday, 08 November 2008

A multinasional Company with global leader in the research, development and manufacture of Consumer Health Product. We have more than 7.000 associates, 50 sectors companies and manufacturing site in 16 countries. We are seeking for highly qualified & talented candidates to fill our vacant position at our manufacturing site located in Batam

1. PROCESS ENGINEER
• Degree in Electronics/Electrical/Mechanical Engineering
• Minimum 5 to 8 years experience in a similar position with exposure in integrated
• Automation and PLC in a clean-room high-end technology environment
• Experience in six sigma would be an advantage
• Must be able to speak and write reasonably good english

2. QC LAB-SUPERVISOR
• Degree in Chemist/Pharmacy/Chemical Engineering
• Minimum 2 years experience in QC Compliance with exposure in MNC environment
• Experience in medical industry would be an advantage
• Familiar with statistical tools application
• Experience in the used of HPLC, GC and GPC spectrometer, FTIR and FTNIR spectometer, UV spectometer and colorimeter instruments
• Must be computer literate

3. TECHNICIAN / ENGINEER
• Diploma/Degree in Electronics/Electrical/Mechanical Engineering
• Minimum 2 to 5 years experience with exposure in Molding, Integrated Automation and PLC in a clean-room high-end technology environment
• Must be able to speak and write reasonably good english
• Able to work on shift and long hours

4. PLANNING & PURCHASING SUPERVISOR
• Dengree in any discipline
• Good in statistic or mathematic
• Minimum 3 years hands-on experience in a similar position with exposure in MNC environment
• Proficient in Microsoft Excel or Lotus 123 office
• Must be able to speak and write reasonably good english

To succeed in this role, candidate must have drive, initiative, resourcefulness, team player and “consumer & costumer focus” attitude. Please send in a detailed resume with current photograph
and contact telephone number to:

HR Department P.O. Box 468 Batam Centre
or Email to: recruit_batam@yahoo.comE-mail ini dilindungi dari spam bots, kamu perlu mengaktifkan JavaScript utk melihatnya , Only shortlisted candidates will be notified


B. ACCOUNTING MANAGER

Saturday, 08 November 2008

We are Batam based a Foreign Company, specializes in the manufacture of pressure vessels, modules, decks and sub sea equipment for the Oil and Gas industry is looking for qualified candidates for

ACCOUNTING MANAGERS
Requirements
• University Graduate (S1 or S2 Degree) in accounting & finance from a reputable university. Overseas graduates is an added advantage.
• Minimum 5 years experience (experience as Auditor in Public Accountancy is an added advantage)
• Well-versed in Indonesia GAAP and IFRS & Indonesia Taxation (Deferred Tax, Corp Tax, Withholding Tax & VAT)
• Strong communication skills, including good command of English both verbal and written
• Good analytical, organization and interpersonal skills
• A team initiator and a team player
Key responsibilities
• Responsible for closing and reviewing monthly accounts to ensure monthly management accounts are timely prepared and submitted to head office;
• To establish operational budget and to ensure cost objectives are met;
• Responsible for budgetary control, credit control and cash flow management;
• Maintain and ensure all finance and accounting policies, procedures and processes are properly implemented and followed;
• Keep abreast of legislation changes to minimize the Company’s tax exposure;
• Ensure the relevant reports are submitted timely to the relevant regulatory authority; and
• Ensure local accounting policies comply with the statutory requirements.

An excellent salary and benefits commensurate with experience will be offered.
Please submit your Application letter to: hrd@profab.co.idE-mail ini dilindungi dari spam bots, kamu perlu mengaktifkan JavaScript utk melihatnya or Fax to: +62-778-413260


C. QUALITY INSPECTOR

Saturday, 08 November 2008

urgently required
An established manufacturing company is looking for qualified person to be post as
QUALITY INSPECTOR (QI)

Requirements:
• Male max 24 years old
• Diploma graduated
• Min. 1 year exp in the same field
• Familiar with ISO 9001 is advantage
• Able to speak and write English
• Preferably knowledge computer literate windows/office
• Good working attitude & able to work independently with high integrity

Please send your resume, expected salaries & recent photo to:
Human Resource Department
PO.BOX 361
Batam Centre 29461
Please state the position in the left top corner of the envelope. Only shortlisted candidate will be notified


JAPANESE TRANSLATOR

Sabtu, 08 November 2008

We are the Japanese electronic manufacturing company Located in Tanjung Uncang seeking for qualified candidates for the respective position as follow:

1. ADMIN & HR OFFICER / EXECUTIVE
2. JAPANESE TRANSLATOR
3. MAINTENANCE CLERK
4. LEADER

General qualification:
• S1 / Diploma (for no.1)
• Diploma / SMU (for no.2,3,4)
• Male (for no.1,2)
• Female (for no.3,4)
• 22-28 years old (for no.3,4)

Special Qualifications:
• Minimum 5 years experience in the same field (1)
• Minimum 1 year experience in the same field (2,3,4)
• Good knowledge of Human Resource and labour law / Regulation (1)
• Able to communicate in English both in oral and written (1,3)
• Can speak, read and write in Japanese languange (2)

Please indicate the position code you are applying on the top left hand corner of the envelope. Send your resume contact phone number and one recent photograph to the Admin Dept within one week from this advertisement Admin / HR Dept.

PT. Maruwa Indonesia
Blok C-51, kawasan Bintang Industri II
Jl. Brigjend Katamso
Tanjung Uncang